NOTE: If your KQ Serial number is KQ1168 or higher, these instructions WILL NOT work.
In rare cases, a game update has caused Killer Queen cabinets to enter a loop in which the game repeatedly attempts to update and becomes inoperable.
When this happens, you can use the following method to revert to the previous, safe build, and use the same method to perform a manual re-install of the newest version.
###############################################
### Making the install usb and installation ###
###############################################
1: Download your build from the following link:
[please open a ticket for link]
1a: If you are looking for the PREVIOUS BUILD, download "kq16.01.iso"
1b: If you are looking for the MOST CURRENT BUILD, download "kq17.0.iso"
2: Download rufus on Windows to make a bootable flash drive. The flash drive needs to be at least 4gb.
2b: Device dropdown = the usb you want to use
2c: Next to Iso Image is a disk drive icon, click on it and select the bumbleos.iso file
2d: Hit Start
3:Plug in a keyboard and usb to the cab
3a: Press F9 (or whatever key you have used in the past depending on your computer) during the boot sequence on the cabinet.
3b: You will see a boot order menu, UEFI must be in the option, choose the one closest to "USB PMAP".
3c: The boot usb has 2 options, Choose the first Install Killer Queen Option
4:Most likely the installer will say that cdrom not found. If that happens follow these 4 steps
4a: unplug usb
4b: hit enter on keyboard
4c: replug usb
4d: hit enter on keyboard
5: Everything is good if installation goes to the end
5a: The system will reboot and take about 40 minutes to install the required packages. Come back in 40 minutes.
5b: The system may turn off its display during this phase. The processes are still running in the background. Press any key to wake up the display if you want to check the progress.
5c: After everything is installed, the system will automatically reboot a second time.
6: Ignore this if your installation has finished.
Depending on the brand of hard drive you have, you may get a partitioning error, then you may need to use the manual partitioning install method in the same usb drive.
6a: Reboot the computer,
6b: Press F9
6c: choose install Killer Queen with Manual Partitioning
#####################################
### Optional: Manual Partitioning ###
#####################################
1: Unmount partitions that are in use? YES
2:Guide-use entire disk and set up lvm
3:Remove existing logical volume data? YES
4:Write the changes to disks and configure LVM? YES
5: Amount of volume group to use for guided partitioning: use provided default value, continue
6: Force UEFI installation? YES
7: Write the changes to disks? YES